TT100 Digital Ultrasonic Thickness Gauge
The TT100 is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces.
With uses in many areas of industry, the TT100 can perform precise measurements on various types of raw materials, component parts and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.
The TT100 is extremely easy to use. After a simple calibration to a known thickness or sound velocity, the gauge will give accurate readings in millimetres. Sound velocities for five different materials can be preset and ten thickness readings can be stored in the memory.
Technical Specifications:
|
Measuring Range (steel) |
1.20mm - 225.0mm with 5MHz transducer |
|
Measuring range for steel pipes |
Minimum 3.0mm thickness x 20mm diameter |
|
Transducer frequency |
Standard 5 MHZ, 10mm diameter |
|
Display resolution |
0.1mm for TT100/ 0.01mm for TT130 |
|
Calibration |
4.0mm steel base plate integrated |
|
Measurement accuracy |
+/- (1%H+0.1)mm |
|
Measuring units |
mm/inch |
|
Sound Velocity |
1000m/s˜9999m/s |
|
Display |
4 Digital LCD with backlight |
|
Memory |
Storage of ten thickness readings |
|
Surface temperature |
-10ºC to +60ºC |
|
Battery indicator |
Low battery voltage indicator |
|
Power supply |
2 pcs. AA batteries 1.5V |
|
Operation time |
250 hours continuously |
|
Dimensions |
126mm x 68mm x 23mm |
|
Weight |
Approximately 250grams including batteries |
The TT100 is supplied complete with 2 only 5MHz probes, coupling agent, certificate, instruction manual and carrying case.
The TT130 has all the specifications of the TT100 with the added advantage of accuracy measurements to 2 decimal places.
Product Information:
• Easy to operate ultrasonic thickness gauge
• Suitable for most metallic and non-metallic materials
• Two Standard 5 MHz transducers included
• Sound velocity range up to 9999m/s
• Clear 4-Digit LCD
• Display resolution 0.01mm
• Memory for 10 readings
• 5 pre-set sound velocities for repeating applications
The TT130 is supplied with instrument, 2 only Standard 5 MHz Transducers, Integrated Steel Calibration Plate 4.0mm, Batteries AA 1.5V, Couplant, Certificate, Instruction Manual and Carrying Case.
Also available in the Time range:
TT110 • Easy to operate ultrasonic thickness gauge • For steel only |
TT120 |
TT300  • Easy to use handheld thickness gauge • Suitable for most metallic and non-metallic materials • Choice of either 2Mhz or 5Mhz probe |
TT310 • Easy to use handheld thickness gauge • Suitable for most metallic and non-metallic materials |
TT320 • Easy to use Handheld Thickness Gauge • Special model for testing thickness of high temperature steel surface up to 300ºC. |
TT340 • Easy to use handheld thickness gauge • Suitable for casting material and most metallic and non-metallic materials |
For more information, please visit the time group website at:
http://www.timegroup.com/
|
